Onkyo Cable Amplifier

AVR-1910 is packed with technology and features making it the clear choice for value oriented consumers looking for exceptional performance. Each of its 7-amplifier channels produce 90 watts of power, delivering detail and dynamics to music and movie soundtracks. They can be configured for 7.1 channel surround sound, or drive a 5.1 channel system in the main room and power a pair of speakers in a second “zone”. It’s equipped with 1080p compatible HDMI 1.3a Repeating technology, delivering both audio and video to your HDTV with single HDMI cable. This HDMI connectivity supports the latest generation surround sound formats available on Blu-ray disc, including Dolby TrueHD and DD+, dts-HD and dts-HR. Also included is Dolby Laboratories new Pro Logic IIz Matrix decoding featuring front height effects channels that expands front soundstage. The AVR1910 boast a number of Audyssey technologies. Advanced Audyssey MultEQ analyzes a speaker systems interaction with room acoustics, and then delivers custom tailored correction processing to optimize clarity and tonal balance throughout the listening space. Audyssey Dynamic Volume is an automatic volume-leveling system that tracks audio dynamics to eliminate the irritating volume swings between TV shows and commercials. Audyssey Dynamic EQ is also on board to ensure rich bass and smooth tonal balance at low volume listening levels. In addition to enhanced HDMI 1.3a repeating (4 in, 1 out), the AVR1910 is the least expensive receiver in the Denon lineup to feature 1080p i/p conversion, analog to HDMI upscaling and HDMI to HDMI scaling. Video conversion is accomplished using a premium Anchor Bay Technologies 1030 chip set featuring 10-bit processing. The AVR1910 also features component video switching (2 in, 1 out), seven analog inputs, and multi-zone (2)/multi-source (2) capability. A front-panel audio/video input allows quick and easy connection of camcorders and game systems.

Amazon Sales Rank: #685 in Receiver or Amplifier Color: Black Brand: Denon Model: AVR1910 Dimensions: 6.70" h x 17.10" w x 14.80" l, 23.59 pounds All 7 channels of equal 90-watt power @ 0.08 % THD, 20 - 20kHz HDMI 1.3a Repeating (4 input, 1 output) provides one cable connection between the receiver and TV 1080p HDMI connectivity supports Blu-ray disc surround sound formats, including Dolby TrueHD and DD+, dts-HD and dts-HR Dolby Laboratories new Pro Logic IIz Matrix decoding featuring front height effects channels Audyssey MultEQ, Dynamic Volume and Dynamic EQ

From the Manufacturer The Denon AVR1910 7.1-Channel Multi-Zone Home Theater Receiver with 1080p HDMI Connectivity - Enhances Your Level of Entertainment Enjoyment The AVR-1910 is a 7.1-channel A/V surround receiver that brings out the full performance of HD audio and HD video. It also has a high-performance video processor that reproduces the usual SD picture quality of DVD and other sources in the high 1080p resolution of HD video. The highly versatile AVR-1910 even supports Dolby Pro Logic IIz that reproduces surround sound with vertical dimensions in the front. Includes four HDMI inputs and dual component inputs(View larger)

Most helpful customer reviews 210 of 211 people found the following review helpful. Best mid range A/V receiver By J. Siverly Last year I spent several months trying various A/V receivers when I upgraded to bluray and a new plasma TV. I tried an Onkyo 606, Denon 988, and a Yamaha 663 and ultimately ended up with the Yamaha RX-V663 as I felt it gave the best performance for the money. I decided to switch to a different receiver after I changed my home theater setup and began to route everything to the tv via 1 HDMI cable. The Yamaha's video processing on HDMI sources was fine, but other analog sources were seriously degraded when converted to digital. So my search began again. After many months of research at various forums and websites, here were my conclusions about the new 2009 models: 1. Yamaha 665 added extra HDMI inputs and video upscaling which is good but also cut weight by about 8 lbs mainly from the amplifier which means less output and clean sound. 2. Onkyo 607 is mainly the same as last year's, with an extra HDMI for a total of 5 inputs. Added Dolby Prologic II Z which is more of a gimmick than useful from what I have read. Still runs very hot and has same poor video processing chip. Questionable reliability. 3. Harman Kardon was the brand I owned before my Yamaha and I really love them, but last year had excessive amounts of glitches with video and audio compatibility. Most have been corrected buy I'm not willing to take that chance as of yet. 4. Pioneer makes a nice unit in the 1018 last year, but this year the 1019 has been cut drastically in weight too. Power amp has been cut down to lower levels. Nice GUI and ipod compatibility built in, but a little weak in the power section. 5. Sony. Never really been fond of Sony receivers in the past. ES series is nice, but pricey. I personally never even considered anything below the ES line. And that brings us to the 1910: I am flat out blown away by this receiver. The main reason I wanted it was for the Audyssey processing. The only thing I was in love with on the Onkyo 606 I tried out was the Audyssey dynamic EQ. The 988 I demoed did not have it but the 1910 does and it is worth every penny. I have 2 small kids and even though my theater room is 2 floors below, I obviously can't listen at reference volumes. Audyssey dynamic EQ along with Dynamic Volume is a knockout combo. The bass response and sound from the rears is jaw dropping at lower levels. I would pay much, much more just for this feature. Last night I listened to Goo Goo Dolls live from Buffalo DVD and I heard things I never heard in the mix before. Every strum on the guitar and bass line was alive and distinct. Drums thumped and vocals were crystal clear. I also watched Live Free or Die Hard on bluray (thanks Amazon for the lightning deal!!) and the surround effect at -35db on the volume was nothing short of spectacular. Speaking of spectacular, the Audyssey auto setup nailed everything perfectly. I have a 6.1 Jamo surround setup consisting of 4 matched satellites, a larger center, and a smaller rear center. The 1910 has independent crossover levels for each speaker, unlike my Yammy which was one global setting. The crossovers were dead on for each of the 3 different speakers. Levels and EQ settings were perfect. My room is 18 x 22 and my wife even commented how on the other side of the room not in the sweet spot for listening, the sound was much better than before. I am running all 6 ohm speakers and this thing seems to have plenty of power for my room size. The 1910 has the Anchor Bay scaling chip this year instead of the Faroujda chip last years 1909 had and from what I have seen so far, it handles component to HDMI signals with no problems. I always thought Denon was overpriced and over hyped after trying the 988. With the added Audyssey features and half the price, this 1910 is the deal of the century. The only drawbacks are: 1. Poor remote. I have a Harmony One so it' not much of an issue for me. 2.